Promotions INQUIRY: +91 9916040249

AT1000 Potentiometric Titrator with 1 Burette and 1 Pump - Model AT1112

AT1000 Potentiometric Titrator with 1 Burette and 1 Pump - Model AT1112
Product #: AT1112.97
Unit Price Contact Hach

Reliable Titration Results

Eliminates operator interpretation and manual processes with automatic titration to quickly deliver accurate and repeatable results.
Pre-programmed titration methods detect end points and eliminate manual calculations to make results easier to achieve without advanced programming.

Simple Setup and Titration

Application-specific functions to eliminate complex titration setup and analysis.
Hach’s unique application kits make it quick for anyone to set up and operate a test.

Low Cost of Ownership

• Reduces the amount of reagent used for every titration cutting cost of ownership month after month
• Increases lab throughput by allowing operator to prepare next sample while titrator performs measurement
• Adding an AS1000 sample changer allows the operator to load multiple samples and come back for results later

Improves Lab Safety

• Minimizes direct contact with reagents
• No need for potentially dangerous colored indicators
• Instrument can be easy and safely moved thanks to the compact design

Low Maintenance

• Reliable design significantly reduces downtime
• Extended periods between maintenance routines
• Maintenance is simple and easy to perform

What's included?

1 ea. AT1112-Titralab AT1000 Titrator
1 ea. LZE144- Power Supply
1 ea. LZE141- 4 position tube holder
1 ea. LZE185- Electrode Storage Tube
1 ea. Basic User Manual
Sold Separately: Don't forget to order your Application Pack and Reagents and consider purchasing an AS1000 Sample Changer.

Specifications

Application: 5
Automatic Reagent Addition(s): Integrated peristaltic pumps for reagent addition
Beaker Volumes Accepted: System specific beakers: Polypropylene, 50 mL & 150 mL with clips
Generic beakers supported: Up to 250 mL low form glass
Burette: 1
Burette: Volumes Available: 2.5/5/10/25 mL, ISO8655-3
Burette Motor Resolution: 20,000 steps with electronic µstepping technology (128 µsteps/step)
Calibration: Titrant & electrode (up to 5 buffers in Auto Mode, fixed & user defined)
Calibration Curves Display: Direct & derivative titration curves, electrode calibration curve
Calibration Intervals/Alerts/Reminder: Yes, user defined period
Certifications: Safety IEC/EN 61010-1; EMC IEC/EN 61326-1
Data Export: On USB Key, CSV type, Excel compatible.
Data Memory: Last 100 samples, QC & blank analyses, last 10 calibrations
Data Storage: Date, Time, Operator IDs, Sample IDs
Display Type: 5,7"; Graphic colour; VGA
Electrode: IntelliCAL ("Plug & Play" digital), analog, photocolorimetric; 2 inputs available
Embedded Procedures: Tubing bubble purging, reagent priming, burette and pump replacement
Installation category: Category II
Languages: English, German, French, Italian, Spanish
Maintenance Scheduler: Yes, user defined
Material Enclosures: PP Latene, Silicone, Hardered Glass, POM, Stainless Steel. Splashproof design
Measurement method: Potentiometric (zero & imposed current), amperometric, colorimetric
Measurement Modes: End Point, Inflection Point - Sample, Blank, Sample with Blank, QC Sample, QC Sample with Blank
Model: AT1112
Operating Conditions: 15 - 35 °C (59 - 95 °F), 20 - 80 % RH, non-condensing
Operating Humidity: 20 - 80 % (non-condensing)
Operating Interface: Soft keypad (silicone)
Operating temperature range: 15 - 35 °C (59 - 95 °F)
Outputs: Electrode ports (x2), USB (x2), Serial (x1), Ethernet (x1)
Parameter: mV/pH, Conductivity, Temperature (°C or °F)
Password Protection: Yes, user defined
Pollution Degree: 2
Power requirements (Hz): 50/60 Hz
Power requirements (Voltage): 100/240 VAC
Pump flow rate: 100 mL/min
Pumps: 1
Required Application Package/s: AP0003.AT1112 Ca & Mg Hardness in water
AP0010.AT1112 Salt in food products
Resolution: Conductivity: ±0.5 % of reading
  mV/pH: ±0.1 mV / ±0.001 pH
  Temperature: ±0.3 °C
Sample Stand: Integrated, magnetic stirring, beakers up to 250 mL
Storage conditions: -5 to 40 °C (23 to 104°F)
Supported Peripherals: Printer, PC software, balance, sample changer, keyboard, mouse, barcode reader, sampling pump, propeller stirrer
Titration Modes: Sample, blank, sample with blank, QC sample, QC sample with blank
Titration Types: Potentiometric (zero & imposed current), amperometric, colorimetric
Warranty: 12 months
Weight: 4 kg
What's included?: 1 ea. AT1112-Titralab AT1000 Titrator
1 ea. LZE144- Power Supply
1 ea. LZE141- 4 position tube holder
1 ea. LZE185- Electrode Storage Tube
1 ea. Basic User Manual
Sold Separately: Don't forget to order your Application Pack and Reagents and consider purchasing an AS1000 Sample Changer.