Chemistries INQUIRY: +91 9916040249 - e-Shop: +91 63668 87212

SC1000 Probe Module, 4 Sensors, 4x 4-20mA Out, 110-240V AC

SC1000 Probe Module, 4 Sensors, 4x 4-20mA Out, 110-240V AC
Product #: LXV400.99.00122
Unit Price Contact Hach

“Plug and Play” Operation

There’s no complicated wiring or set up procedures with the
sc1000 controller. Just plug the sensor into a Probe Module
and it’s ready for use. No special ordering or software
configuration is needed.

Mix and Match Digital Sensors

Any Hach digital sensor can be plugged into the sc1000
Probe Module in any combination. Available parameters
include—but are not limited to—dissolved oxygen, pH, ORP,
conductivity, turbidity, suspended solids, nitrate, chlorine, ammonia, phosphate, etc.

Flexible Input/Output Options

Communication and relay options for the sc1000 controller
can be configured to suit any situation. Available
configurations for a single Probe Module include:
• up to 4 relay contacts for alarm and control functions,
• up to 12 analog outputs for measured values,
• up to 12 analog or digital inputs from non-digital sensors
(i.e., flow or pressure sensors),
• up to 8 digital inputs from digital sensors,
• select from multiple network card options such as
MODBUS®, PROFIBUS DP®, and more.

Advanced Communication Options

Use the sc1000 controller for hassle-free communications.
Advanced communication features include:
Modbus TCP/IP—The sc1000 controller features
state-of-the art Modbus TCP/IP communications
protocol for seamless integration into a network of
devices that support TCP/IP sockets. Use a
standard Ethernet cable or connect wirelessly using
GSM/GPRS to communicate with your SCADA,
PLC or your organization’s network.

Expandable and Upgradeable

The Hach sc1000 Controller can adapt to your needs.
Change probes without changing the controller. With a
single Display Module, additional Probe Modules can be
added or removed depending on operational needs. Fully
upgradeable software ensures that this system will not be
obsolete. Hach service plans are available.

What's included?

sc1000 Probe Module with installed cards (as requested), Basic User Manual

Specifications

Alarm: Low alarm point, low alarm point deadband, high alarm point, high alarm point deadband, off delay, and on delay
Analog Inputs: No Input Module
Analog Output: One 4-20 mA Output Module
Analog Output Functional Mode: PID, high/low phasing, setpoint, deadband, overfeed timer, off delay, on delay
Certifications: European Certifications:
CE per 73/23/EEC and 89/336/EEC
TUV-GS to EN 61010-1
EN 61326 Amd's 1 & 2
Communication: Modbus® (RS485): Advanced communications/networking with PLC or SCADA system directly from analyzer
Profibus® DP/V1 (certified)
GSM/GPRS Quad-band cellular module (FCC and IC approved, EU and US only)
Ethernet service port, RJ45, 10 MB/s
Communication Capabilities: None
Conduit for Relay Connection: No
Dimensions (H x W x D): 150 mm x 315 mm x 250 mm
Display: ¼ inch VGA graphical backlit TFT colour glass/glass touchscreen, high resistance 320 x 240 pixels
Display Viewing Area: 11.4 x 8.6 cm
Enclosure Rating: IP65
Inputs: Up to 12 analog 0-20 mA, maximum impedance 500 Ohms per probe module. Additional analog inputs are available with additional probe modules.
Material Enclosures: ABS (display module) and metal (probe module) enclosure with corrosion resistant finish
Mounting: Surface, panel, and pipe (horizontal and vertical) with optional sun shield
Operating temperature range: -20 - 55 °C / 0 - 95% relative humidity, non-condensing
Output: Up to 12 analogue 0/4-20 mA, maximum impedance 500 Ohms per probe module.
Additional analogue outputs with additional probe modules. Optional digital communcations via Modbus (RS485) and Profibus DP/V1.
Outputs: Up to 12 analog 0/4-20 mA, maximum impedance 500 Ohms per probe module.

Additional analog outputs with additional probe modules. Optional digital communcations via Modbus® (RS485) and Profibus® DP/V1.
Power Options: 100-240V, no power cord, with conduit
Prognosys: No
Relays: No Relay
RTC Module: No
Sensors: 2 Sensors
Storage conditions: -20 - 70 °C / 0 - 95% relative humidity, non-condensing
Warranty: 12 months
Weight: Approximately 6.5 kg (depending on configuration)
What's included?: sc1000 Probe Module with installed cards (as requested), Basic User Manual