Promotions INQUIRY: +91 9916040249

Contacting Conductivity Sensor, High Conductivity (k=5.0), with ¾" PVDF Compression Fitting

Contacting Conductivity Sensor, High Conductivity (k=5.0), with ¾
Product #: 3422D3A
Unit Price Contact Hach

High Performance Design

These enhanced performance sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Simply key in this constant (Hach’s easy DRY-CAL™ method) when configuring the analyzer to ensure the highest possible measuring accuracy. Also, each sensor has a Pt 1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1ºC accuracy.

Resistivity and Conductivity Measurement Capability

These enhanced performance sensors measure from theoretically pure water (0.057 µS/cm or 18.2 MΩ) up to 200,000 µS/cm. Hach’s sc Digital Controllers accept multiple digital sensor inputs, and can be user-set to measure conductivity, resistivity,TDS, salinity, or one of six
calculated measurements.

Versatile Mounting Styles

Compression Fitting Sensors feature titanium electrodes and a compression fitting for universal installation with up to 102 mm insertion depth. The ½-inch or ¾-inch male NPT compression fitting are offered in PVDF or 316 stainless steel. A longer version of this sensor is available for use with a 316 stainless steel ball valve hardware assembly to insert/retract the sensor form the process without stopping the flow. The longer version can also be used for insertion through a compression fitting. Maximum insertion depth is 178 mm.

Full-Featured “Plug and Play” Hach sc Digital Controllers

There are no complicated wiring or set up procedures with any Hach sc controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”

What's included?

Includes: sensor with 20 ft cable and manual

Specifications

Accuracy: ±2 % of reading above 200 µS/cm
Cable Length: 20 fixed cable (6 wire, 4 conductors and two isolated shield wires)
Cell Constant k: 5 cm⁻¹
Diameter: 12.7 mm
Digital Gateway: None
Electrode Material: Titanium
Flow: 0 - 3 m/s maximum, fully immersed
Installation style: Compression
Junction box: None
Length: 193.5 mm
Material: Compression Fitting: ¾" NPT PVDF
Operating temperature range: -20 - 200 °C
Pressure Range: 1.7 bar at 150 °C
Range: 0 - 10000 µS/cm
Repeatability: ±0.5 % of reading
Response Time T90: 30 s
Sensitivity: ±0.5 % of reading
Sensor Immersion Depth: 155 mm
Sensor Thread: ½" NPT
Sensor Type: Analog
Temperature Measurement: -20 - 200 °C
Temperature Sensor: PT1000 RTD
Transmission Distance: 100 m maximum;
1000 m maximum, when used with a termination box
Warranty: 12 months
What's included?: Includes: sensor with 20 ft cable and manual