Alarm:
Maximum of 16 channel alarms including
high/high, high, low, low/low and system
alarms including low battery, low RTC
battery, low slate memory, slate memory full, sensor timeout, sensor ID error
Alarm Actions:
Send an e-mail, or send text message
(SMS) (requires wireless logger and active
wireless service), trigger sampler, change
logging interval, change call interval
Battery Life:
Varies with sensor type, logging intervals, telemetry and environment.
Certifications:
Logger: CE; optional AC power supply:
UL/CSA/CE
Communication:
USB RS232 (Baud rates: 9600, 19200, 38400, 57600, 115200)
Communication (optional):
Remote Communications (optional): Wireless modem: 3G & 4G LTE
Connector:
1 Stainless steel connectors
Datalog Channels:
16 maximum
Data Storage:
Datalog: 325,000 sensor measurement data points; 1128 days for 3 channels at 15-minute log intervals
Event Log: 1,000 events maximum in non-volatile flash memory
Sample History: 2,000 sample events maximum in non-volatile flash memory
Dimensions:
25.4 x 22 x 40 cm
(10.0 x 8.7 x 16.0 in.)
Enclosure Construction:
PC/ABS structural foam
Environmental Rating:
NEMA 6P (IP68)
Interface:
Hach AS950 Automatic Sampler
All Hach legacy samplers
Non-Hach samplers capable of being triggered by 5 V dc pulse lasting 50 milliseconds
Internet Application Software:
FSDATA web-based software for flowmeter programming, data management and report generation for wireless flow meters
LED Status Indicator:
• Green Flashes every 3 sec during normal operation. Flashes every 15 sec during sleep mode.
• Red Flashes when attached sensor does not agree with the logger program, when an expected sensor is not found or the sensor is not working properly.
Logging Intervals:
1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30 or 60 minutes
Primary and secondary intervals for dynamic logging.
Manual Languages:
Multi-lingual
Modem:
Non-Wireless
Operating temperature range:
-18 to 60ºC (0 to 140ºF) at 95% RH
PC Data Transfer Software:
FSDATA Desktop Instrument Manager software required for programmig logger. Can be used for data management and report generation. It is compatible with desktop/lap top computers utilizing Windows operating system. Minimum resolution: 1024x768.
Power requirements (Voltage):
8 - 18 V DC
Protocol:
Local Modbus RTU
Rain Gauge Enabled:
No
Sensor Connector:
1
Sensor Connectors:
1, no aux
Sensor Ports:
1
Special Remarks:
When paired with a Hach sampler, successful or failed sample, as well as bottle number, are stored in sample history. Sample history can be included in reports generated by FSDATA.
Standard storage temperature:
-40 to 60ºC (-40 to 140ºF)
Supported Sensors:
FLO-TOTE 3, FLO-DAR, FLO-DAR with Surcharge Velocity Sensor (SVS), Submerged Area Velocity Sensor (requires AV9000 Analyzer Module), Rain Gauge, Sigma 950 Flow Meter (requires IM9001), US9001, US9002
Weight:
Using Model FL900:
4.5 kg (10 lb)—no batteries;
6.3 kg (14 lb)—2 batteries;
8.2 kg (18 lb)—4 batteries